Asia WWC APAC Desk

Asteroid Deflection Models Reveal a Risk

Asteroid Deflection Models Reveal a Risk

Researchers at Sandia National Laboratories have demonstrated that an asteroid’s irregular shape can substantially change the outcome of a simulated nuclear-assisted deflection. Their findings, described in a Nov. 5, 2026 laboratory report on research published in Icarus, show why asteroid deflection models must account for more than a target’s size and distance.

The central challenge is prediction. A mission designed to redirect a hazardous object would need to estimate not only how much force it could generate, but also where that force would act and whether the asteroid might begin spinning or shedding material.

Asteroid deflection models find a major difference

In one simulated case, exposing the same asteroid to X-rays from different directions produced changes in speed of 3.9 millimetres per second and 0.8 millimetres per second. The larger response was almost five times the smaller one.

Those figures represent changes in velocity after an X-ray pulse, not the asteroid’s overall travel speed or a confirmed result from a mission in space. They also do not establish that every irregular asteroid will show the same difference.

For a separate simulated asteroid, the resulting change in rotational speed differed by a factor of 17 depending on the direction of exposure. A deflection calculation therefore has two connected questions: where will the object go, and how will its rotation change?

This matters because an asteroid is not a smooth, uniform ball. Surface ridges, hollows and uneven slopes can alter how radiation reaches different areas. An engineering plan that assumes an ideal sphere may miss important differences in the actual push.

How an X-ray pulse could change an asteroid’s course

The proposed method does not depend on directly striking an asteroid with a nuclear device. Instead, a detonation at a distance could expose part of the surface to intense X-rays.

The radiation heats and vaporises a thin surface layer. Material escaping into space carries momentum away, creating a recoil that can change the remaining object’s movement. The principle is similar to the way a jet of gas pushes an object in the opposite direction.

For this method to work predictably, planners would need to understand how much of the surface receives the pulse, how the material responds and which direction the resulting recoil takes. A powerful intervention is not automatically a precise one.

Sandia’s new approach combines high-fidelity physical calculations with more realistic three-dimensional asteroid shapes. Its researchers reported an algorithm more than 1,600 times faster than an earlier approach, making calculations that would otherwise be computationally impractical more manageable.

The crucial limitation: a model is not a space mission

The latest result is a computer simulation, not evidence that a nuclear device has redirected a real asteroid. It also cannot yet accurately predict whether an entire asteroid would break apart.

The model considers the breakup of rock at the surface. That is useful information, but it does not settle what would happen inside a loosely assembled or structurally complicated body under an extreme pulse.

In 2024, Sandia described laboratory experiments using its Z machine to deliver powerful X-ray pulses to small samples of asteroid-like material. Those experiments helped demonstrate a measurable push under controlled conditions. They did not reproduce a full-scale asteroid in space.

NASA’s DART mission proves a different technique

There is already evidence that human technology can change an asteroid’s motion. NASA’s Double Asteroid Redirection Test, or DART, deliberately collided with Dimorphos in September 2022, changing its orbit around the larger asteroid Didymos.

A NASA update dated March 6, 2026 reported that the collision also produced a measurable change in the binary asteroid system’s orbit around the Sun. Neither object was on a collision course with Earth.

DART used a kinetic impactor: a spacecraft physically struck the target. Sandia’s latest work examines the very different possibility of transferring momentum through an X-ray pulse. Success with one technique does not establish that the other is ready for deployment.

The importance of approaching small celestial bodies also appears in WWC’s coverage of Japan’s revised Hayabusa2 asteroid mission. Precise navigation and knowledge of a target’s physical properties matter whether the task is observation, collision or a proposed stand-off intervention.

Why early discovery and accurate observations matter

A useful deflection plan begins long before a spacecraft is launched. Scientists must identify a potential hazard, refine its orbit and learn enough about its dimensions and surface to assess possible responses.

NASA is developing its Near-Earth Object Surveyor mission to help detect difficult-to-observe near-Earth asteroids and comets. The same agency has emphasised that small changes in an object’s trajectory can become meaningful over time when a threat is discovered sufficiently early.

Observing conditions are another practical consideration. WWC has previously examined how expanding satellite constellations can affect telescope observations, including work involving searches for potentially hazardous objects. Reliable detection is part of the defence problem, not a separate concern.

WWC’s report on Japan’s Mars-moon sample exploration plans illustrates how navigation and surface science extend across different missions, even when planetary defence is not their primary objective.

What this could mean

The research points towards a more demanding standard for any future intervention: planners may need detailed shape models and multiple simulated approaches before selecting a direction of action. That is an assessment of the study’s implications, not a claim that authorities have chosen a nuclear response.

There is no evidence in the records reviewed here that a specific asteroid requires such an intervention. Nor do these results establish that nuclear deflection is always superior to a kinetic impactor.

What happens next

Further work must connect realistic external shapes with better predictions of an asteroid’s internal response, including the possibility of fragmentation. Researchers will also need to test whether model predictions remain dependable across different materials and structures.

For now, the practical lesson is that accurate mapping and advance warning could be as important as the available deflection technology. Knowing exactly what is approaching Earth may determine whether a calculated push achieves its intended result.

Frequently asked questions

Can a nuclear explosion stop an asteroid from hitting Earth?

A stand-off nuclear detonation is a proposed deflection method, but Sandia’s latest findings are simulations, not a successful full-scale mission. Its real-world effectiveness would depend on the asteroid and intervention conditions.

Why does an asteroid’s shape affect deflection?

An uneven surface changes which areas receive radiation and how escaping material transfers momentum. Different directions of exposure can therefore produce different changes in motion and spin.

Did scientists find that an asteroid would move five times faster?

No. One simulation found changes in speed of 3.9 and 0.8 millimetres per second from different exposure directions. The comparison concerns the size of the induced velocity change, not the asteroid’s total speed.

Has NASA already changed an asteroid’s orbit?

Yes. DART’s 2022 collision changed the motion of Dimorphos. It demonstrated kinetic impact, not nuclear-assisted deflection.

Get our stories first on Google

More in Asia

See all in Asia